Natural
Fuse creates a city-wide network of electronically-assisted plants that
act both as energy providers and as circuit breakers.
Every seemingly helpful device that a human being uses has its own
carbon ÒfootprintÓ which, in excess, can harm other living beings.
ÒNatural fuseÓ is a micro scale CO2 monitoring & overload
protection framework that works locally and globally, harnessing the
carbon-sinking capabilities of plants.
Natural fuses allow only a limited amount of energy to be expended in
the system; that amount is balanced by the amount of CO2 that can be
absorbed by the plants that are growing in the system.
In the same way that circuit-breakers are useful for preventing
excessive current use, so too can the Natural Fuse plants break the CO2
footprint ÒcircuitÓ.
What would you do? Use less energy?Or supersize the fuse?
---------------------
The system
The
simplest system is one Natural Fuse unit and one 9V appliance on your
desktop - we'll provide you with a lamp, a radio or a fan. You can
choose to be "selfless" or "selfish" in your consumption, but remember
to keep the water bottles topped up so that the Natural Fuse unit can
take care of watering the plants as necessary.
By
networking Natural Fuses together, the plants are able to share their
capacity and take advantage of carbon-sinking-surplus in the system
since not all Natural Fuses will be in use at any one time.
If
people cooperate on energy expenditure then the plants thrive (and
everyone may use more energy); but if they don't then the network
starts to kill plants, thus diminishing the network's electrical
capacity.
----------------------
The
main intention of this project is to balance the carbon footprint and
carbon sink of electricity usage and plants in the system. The
electricity depends on the plants just as the plants depend on the
electricity. And people depend on both.
Natural
Fuse is composed of 3 components: fuse unit (the plant in the pot),
appliances and Pachube (an existing public system we have developed to
share real time sensor and actuator data between remote environments
via the internet).
---------------------
The
fuse unit comes with Òfuse careÓ function, which helps take care of
your plant via a remotely activated water-controlling-system. This
function will work only if there is enough energy left to use.
But
if too much energy has been used, Òfuse killÓ function will be
activated.ÒFuse killÓ function literally kills the plant, breaks the
circuitand allows no electricity flow through the outlet that this
plant is connected to.
----------------
Interaction & participation:
On the unit, there is power-activation switch, which the owners can
adjust depending on how much they want to use the energy. There are 3
modes, OFF, SELFLESS and SELFISH.
-----
In ÒOFFÓ mode, the system uses minimal energy, turns itself on once every hour.
No energy flows to the appliance
connected to the unit.
As
a result, the overall CO2 absorbed in the whole system gradually
increases, and the plants in this unit are cared for by the system.
-----
In ÒSELFLESSÓ mode, the unit gives power to appliance at a rate that
ensures CO2 production and capturing in the entire Natural Fuse system
remain in
equilibrium.
As
a result, owner might be able to turn on the lamp for 10 mins a day,
depending on status of the whole system and consumption rate of the
appliance.
-----
In
ÒSELFISHÓ mode, the unit gives as much power to appliance as it needsAs
a result, the owner can use the appliance as normal but it might cause
the whole CO2 absorbed in the system to decrease or even lead to total
systematic breakdown.
CAUTION: IF SYSTEMATIC BREAKDOWN OCCURS, THE SYSTEM MAY KILL 1 RANDOM UNITÕS PLANTS, AND IT PROBABLY WONÕT BE YOUR OWN!
-------------------
Community Website:
The
Natural Fuse website (www.naturalfuse.org) is the place to find out
about the network's status and also individual Natural Fuse units: a
social networking site for plants and their owners.
Here
you can find out who has been "selfish" or "selfless", who has killed
whose plants and you can also download the complete research report and
instruction manual.
------------
Take a Natural Fuse home with you!
Participants
can 'rent' a Natural Fuse either by lending plants to the exhibition,
or by paying money ($50.00) which will be donated in your name to the
Bronx River Arts Center with a link to http://www.bronxriverart.org/
You
can take a Natural Fuse home for 1 month (which can be extended unless
someone else is on the waiting list). You will need an internet
connection, and a router with an ethernet port. You can also take a
lamp, a radio or a fan to plug into it.
If
you have 'rented' your Natural Fuse by lending plants, then these will
be applied to offset the carbon footprint of making a single cup of
coffee. Depending on how many plants are in the exhibition, more cups
of coffee can be made! Please come and collect your plants at the end
of the exhibition.
--------------
During
research and development we encountered several issues that have
affected the design process. These highlight the kinds of challenge
faced by "carbon sinking" initiatives in general.
First,
the amount of CO2 that a single houseplant can sink is much smaller
than expected. What would you do? Use less energy? Or supersize the
fuse? You might need 360 plants to offset your 50W lightbulb!
Second,
when a plant dies any carbon sequestered during the growth period is,
in the absence of continued sequestration (e.g. by sealing it deep
within the earth), soon released back into the atmosphere. A zero-sum
situation depends entirely on where the arbitrary boundaries of the
system are drawn. What would you do with your plant? Eat it? Bury it?
Weave it?
More info about the development process at http://www.naturalfuse.org/blog/ |
